FFC Changelog
3.0.0.6 [2021-02-12]
- Change: Improved Revit export of Extruded Objects
3.0.0.5 [2021-02-05]
- Bugfix: Fixed intersect bug (GetProjectedLines)
3.0.0.4 [2021-02-03]
- New: Added dxf spline import
- New: Started to add support to export revit objects to ffc brep objects
- New: Started to add support for brep objects
- New: Added support to connect multiple ledgers and bracings to a single connector point
- Change: Structural interpreter: Collision test improved
- Change: New version of SupplProvLoadCapFoW_en-US.pdf
- Change: Changed SpecificWeightLoadObjects default value to 25
3.0.0.3 [2021-01-20]
- Bugfix: Fixed createWindLoadCommands method
- Change: Improved CreatePolygons performance by using polygon hash (debug/develop)
3.0.0.2 [2021-01-15]
- Bugfix: Fixed beam configuration (possible crash reported by Mr. Ringe 13.01.21)
- Change: Added support to create beam loads for secondaries placed on start or end of primary beam
3.0.0.1 [2021-01-04]
- Bugfix: FormsUp load calculation on beams
3.0.0.0 [2020-12-23]
- New: Added support for floating restraint option for load introduction surfaces, added support for beam dummy floating restraint option
- New: Added FloatingRestraintOnStart and FloatingRestraintOnEnd fields to LoadTransferBeam class
- Bugfix: FormsUp Loads in gaps
- Bugfix: Fixed bearing point placement for primary and secondary beams
- Bugfix: FormsUp assignment bearing to primary beam
2.3.5.3 [2020-12-18]
- Bugfix: FormsUp Load in gap "numeric" improved
- Bugfix: FormsUp SI in STRAN-dataset couplings between primaries fixed
- Bugfix: Formsup/SI Analyse "cantilever" fixed
- Change: Reactivated error message for load cross check failure
2.3.5.2 [2020-12-17]
- New: Added selection filter for primary beams
- New: Added status bar button support to show loads on primaries/primary beam dummies
- Bugfix: CalculateContinuousBeamDummiesReactionForces - Split loads on parallel primaries in gaps
- Bugfix: Several beam load calculation fixes
- Bugfix: Formsup/SI Analyse "cantilever" fixed
- Change: Added support to read product system from dummies or standards for leg bearings
2.3.5.1 [2020-12-08]
- Bugfix: Another fix for load placement within a zero gap
- Bugfix: Improved load distribution inside beam gaps
- Bugfix: Fixed reported beam load issues from Mr. Burkert 4.12.2020
- Bugfix: Fixed CreateLegLoadLabelBlocks method
2.3.5.0 [2020-11-19]
- New: Added support for new scope "Formwork"
- Bugfix: Fixed position of generated primary beam loads for twin beam configurations
2.3.4.9 [2020-10-22]
- New: Added setting for specific weight of load objects
- Change: FormsUp-Report: Added columns "Self weight of formwork..." to table "Load assumptions"
- Bugfix: Fixed formwork dimensioning rendering
2.3.4.8 [2020-10-19]
- Bugfix: Report deflection scale improved
- Change: Report "Guidelines" replaced
2.3.4.7 [2020-10-15]
- Bugfix: Fixed beam configuration for single beam configuration
- Bugfix: Structural Interpreter Handling LDBs
- Change: Improvements Formwork report
2.3.4.6 [2020-10-15]
- Bugfix: Fixed beam configuration for single beam configuration
2.3.4.5 [2020-10-08]
- Bugfix: Fixed load result preview (removed zero values from list) Bug #9 LoadGeneration Mr. Ringe
- Bugfix: Report proof of utilsation -Table Degree of the max.utilsation - missing data fixed
- Bugfix: Fixed Bug Aligned Joint #4,7 Mr.Ringe
- Change: Improved external line dimensioning (collision avoidance)
2.3.4.4 [2020-10-01]
- New: Added support for second beam dummy rearrange mode
2.3.4.3 [2020-09-18]
- New: Added support for MasterData FfcItemFamily
- New: Added LoadObjectsCoveredArea to FfcLoadCalculationModel
- Change: FormsUp: Further development
2.3.4.2 [2020-09-08]
- New: Added transformDirection parameter for DimensioningText, Added auto dimensioning line orientation for external dimensioning lines
- New: Added support for primary/load object dimensioning (Report #2 Mr. Ringe)
- Bugfix: Fixed Bug Configuration #3 Mr. Ringe
- Change: FormsUp: Further development
- Change: Improved overlap beam configuration (Overlap Bug #7 Mr. Ringe), reactivated optimize cantilevers method
2.3.4.1 [2020-08-27]
- New: Added load object volume sum to load calculation model
- New: Added show load calculation info to context menu
- New: Added support to generate ldbs for configured legs
- Bugfix: Fixed bug #12 (butt joint), #9 (overlap joint)
2.3.4.0 [2020-08-24]
- New: Added support for manual beam selection
- New: Added support to save load calculation input data and results to project file
2.3.3.9 [2020-08-10]
- New: Added optimize cantilevers method
- Change: FormsUp: Further development
- Bugfix: Fixed beam configuration bugs
2.3.3.8 [2020-07-31]
- Bugfix: Fixed several beam configuration bugs
2.3.3.7 [2020-07-28]
- Bugfix: Fixes for inclined twin beam calculation
- Change: Added support to insert multiple bearing on same point for different bearing target types
2.3.3.6 [2020-07-27]
- Bugfix: Fixed rearrange dummy method
- Bugfix: Fixed GenerateLoads on beams for inclined beams
- Change: FormsUp: Further development
2.3.3.5 [2020-07-23]
- New: Added support for DimensioningSymbol types
- New: Added support for coordinate origin for dimensioning view
- Change: FormsUp: Further development
2.3.3.4 [2020-07-21]
- New: Added support to rearrange secondary beam dummies
2.3.3.3 [2020-07-17]
- Bugfix: Fixed generateFrameLedgerBracings method
2.3.3.2 [2020-07-15]
- New: Added support for beam overlap on end and start
2.3.3.1 [2020-07-09]
- New: Added more beam configuration validations
- Bugfix: Get relations - filter for productsystems
- Bugfix: Beam configuration butt joint bugfix
2.3.3.0 [2020-07-08]
- New: Added support for results for overlap beam configuration
- New: FormsUp further development - activity display added
2.3.2.9 [2020-07-08]
- Bugfix: Beam configuration fix for butt joints
2.3.2.8 [2020-07-06]
- New: Added support to filter beams by family
2.3.2.7 [2020-07-06]
- New: FormsUp further development
- New: Added a new button to go through a list of selected objects to display their properties
- New: Added family attribute to FfcItem
- New: Added support for inclined beams
- Bugfix: Improved overlap beam configuration
- Bugfix: Fixed some beam configuration bugs for butt joint
2.3.2.6 [2020-06-19]
- New: FormsUp further development
- Change: Improved overlap beam configuration
2.3.2.5 [2020-06-18]
- New: Started to add support for overlap join for beam configuration
- New: Added support to scale dimensioning text
- New: Added support to get extents for all dimensioning objects
- New: FormsUp further development
- Change: Added AutoAdjustViewPortOnInsert property to ZoomAndPanCanvas
2.3.2.4 [2020-06-05]
- New: Added 3d support for bearing points
- New: Twin beam support for beam configuration
- Change: Structural Analyzer updates
- Bugfix: Fixed generate loads on beams and legs
- Bugfix: Fixed duplicate beam method
2.3.2.3 [2020-06-03]
- New: Beam configuration results
- Change: Improved structural analyzer beam calculation support
2.3.2.2 [2020-05-29]
- Change: Beam configuration improvements
2.3.2.1 [2020-05-28]
- Bugfix: Several beam configuration bugfixes
2.3.2.0 [2020-05-28]
- Change: Beam configuration improvements for non-horizontal configurations
2.3.1.9 [2020-05-26]
- Change: Beam configuration improvements
2.3.1.8 [2020-05-20]
- Change: Beam configuration improvements
2.3.1.7 [2020-05-15]
- Change: More beam configuration algorithm improvements
2.3.1.6 [2020-05-13]
- Change: Improved beam configuration algorithm
2.3.1.5 [2020-05-12]
- New: DimensioningView improvements, added ReScale method
- New: Started to implement new beam configuration algorithm
- Change: FormSup issues
2.3.1.4 [2020-04-22]
- New: Added support to read generate_at and child_group attributes for beams
- New: Added support to add e,aeff values to dummies in convert to dummy method
- New: Formsup improvements
- Change: Changed GetRelevantDummyStandards for Al_PD8, removed additional standards
- Bugfix: "Anzeige_GED_Addmarke" - plane
2.3.1.3 [2020-04-15]
- New: Added support for dimensioning lines blocks and internal dimensioning lines
- New: Started support to calculate Formsup
2.3.1.2 [2020-04-03]
- Change: Added check "headspindle protruding"
2.3.1.1 [2020-03-31]
- Change: Improved support for spindles in AluProp systems
2.3.1.0 [2020-03-03]
- Bugfix: Small report issues fix for FFC Release 2.3
2.3.0.0 [2020-03-02]
2.2.1.6 [2020-02-28]
- Change: Updated manual and supplementary provisons
2.2.1.5 [2020-02-28]
- Bugfix: Fixed MeasureDistanceToolTip language entry
- Bugfix: No "sonderobjekte" and Get STRAN-results
- Bugfix: Fixed clearance overhang generation for columns and vertical slabs
- Bugfix: Report headers, translation
- Change: Added support to create foot/head bearings for configuration with only one part
2.2.1.4 [2020-02-21]
- Bugfix: Show results compact; Added "options" to batch calculation (QA)
- Bugfix: Fixed dummy insert
- Bugfix: Fixed clearance overhang support for walls and joists
- Bugfix: Small bracing generation bugfix
- Change: Reports: Modified headers for Debug- and Beta-"TEST"-Version; Option "RENEW" for Batch Calculation supported
2.2.1.3 [2020-02-05]
- New: Added support for re-loading master data items from directory on startup
- New: Started to add support for formwork reports
- Changed: Added support to read masterdata item files recursively
- Bugfix: Fixed beam load calculation
2.2.1.2 [2020-01-13]
- Bugfix: Fixed TowerControl (non-initialized tower type)
2.2.1.1 [2019-12-11]
- Change: set expert mode if masterdata is loaded from file (na validity info)
- New: started to add support for Ischebeck HV system
2.2.1.0 [2019-12-09]
- Bugfix: Fixed wizard (duplicate clearance generation)
- Bugfix: Dimensions for "g" ; "Aw" in FFC-Report "Structure data"
2.2.0.9 [2019-12-05]
- Bugfix: Fixed BatchProcessingQA not being executable on Develop
- Bugfix: GenerateLoadsOnBeamsAndStandards fixes
2.2.0.8 [2019-12-05]
- Bugfix: Added datacheck in Sub CalculateSecondaryBeamDummiesReactionForces
- Bugfix: GenerateLoadsOnBeamsAndStandards when using beam dummies
- New: Added wizard type2 for ST60 leg configuration
2.2.0.7 [2019-12-03]
- Change: Improved structural data report
2.2.0.6 [2019-11-20]
- Change: Modified reports and added new report with structure data
- Change: Updated ReportViewer dlls to Version 15.0.900.148
- Bugfix: Fixed getSortedLoadTransferBeams method
2.2.0.5 [2019-11-04]
- Bugfix: Cutted spindles; Hinges at LDBs; Distributed loads on LDBs
2.2.0.4 [2019-10-29]
- Bugfix: View results "compact" filtering max. values
- New: Added special support for local proofs in base spindles
2.2.0.3 [2019-10-24]
- Bugfix: "Set errorstatus in case of divergent calculation" solved
2.2.0.3 [2019-10-24]
- Bugfix: "Set errorstatus in case of divergent calculation" solved
2.2.0.2 [2019-10-22]
- New: Added support to configure beams on configured legs
- New: Added support to create new special bearing X_UI_SPRING_FBEAM as leg load bearings and read E,A values from masterdata. Additionaly height and product system is added to bearing.
- New: Improved support for E and Aeff for leg dummies, added product system attribute to leg dummies, reactivated load generation for primary and secondary beam dummies for configurations with configured beams
- New: Added support to determine E and AEff values from configured system for loads on beams calculation
- New: Added support to assign beam items to secondary beam dummies on generation
- New: Added duplicate beams feature
- New: New bearing "Base RotFix" added
- Change: Reactivated Fixed RotX and RotY bearing support within defined bearing templates
- Bugfix: Fixed generate secondary beam dummies support
2.2.0.1 [2019-07-12]
- Bugfix: Fixed bearing edit support
- Change: Deactivated load generation on primaries and secondaries when generatings loads on legs
2.2.0.0 [2019-07-01]
- Bugfix: Fixed automatic leg dummy/tower placement
2.1.9.9 [2019-06-28]
- Change: Improved automatic leg dummy standard/tower placement (auto mode)
2.1.9.8 [2019-06-26]
- Bugfix: Fixed load calculation cross check for mixed ldb/beam dummy configuration
2.1.9.7 [2019-06-26]
- New: Added load and volume labels to load generation objects
- Change: Resized loads on legs wizard page to support small screen resolutions
- Bugfix: Small fix of load calculation cross check
2.1.9.6 [2019-06-21]
- Changed: Added cross-check to detect load calculation errors
- Bugfix: Fixed some intersect issues, returned to old polygonizer due to missing polygons within load calculation
- Bugfix: Wizard fixes on entry of clearance configuration
- Bugfix: Loads generation preview fix for standard wizard
- Bugfix: Fix for intersected load object selection in load generation list on wizard
2.1.9.5 [2019-06-06]
- Bugfix: "Duplicate standard parts" on new wizard if combined with non-wizard dummy generation
2.1.9.4 [2019-05-24]
- New: Added ConfigurationTypeViewModel to add support for configuration type translation
- New: Added new ledger configuration type "TypeNoLedgers"
- New: Added support to skip colliding LDBs when generating LDBs
2.1.9.3 [2019-05-21]
- New: Added collective configuration check for different dummy types within wizard
- New: Added support for change reference dummy on wizard
- New: Added center dummies at insert point support for dummy insert auto mode
- Change: Changed default formwork base clearance to type soffit aligned for falsework wizard
- Change: Changed load diagram colors for work traffic and formwork weight and added distance between these load diagrams values
2.1.9.2 [2019-05-15]
- New: Support for LDB on InnoAPSplus_Spindle
- New: Improved falsework configuration wizard
- New: Added wizard support for load generation
- New: Added wizard support for leg dummy configuration
- New: Added wizard support for clearance configuration
- New: Added wizard support for ldb configuration
- New: Added wizard support for bearing configuration
- New: Added wizard support for leg loads generation
2.1.9.1 [2019-03-15]
- Bugfix: Solved a problem with erroneously collision detections
- Bugfix: Fixed rounding issues for align base spindles and change spindle extension methods
2.1.9.0 [2019-03-13]
- Bugfix: Fixed some translations of "Proof of Load Capacity" and "FFC Proof of Serviceability" reports
2.1.8.9 [2019-03-08]
- New: Added translation for "Proof of Load Capacity" and "FFC Proof of Serviceability" reports
- New: Added support to set e and a values from masterdata on genarating dummy standards/towers
2.1.8.8 [2019-02-19]
- Change: Renamed InnoAPS to INNO_APS and MPS to INNO_MPS
2.1.8.7 [2019-02-11]
- Bugfix: Fixed previous develop release
2.1.8.6 [2019-02-06]
- New: Started to add support to create optional bearings on legs when generating loads on legs (debug/develop)
- Change: Improved "h-loads toggle function, wind load directions
- Bugfix: Fixed "Load Masterdata Items"
2.1.8.5 [2019-02-01]
- New: Added support to calculate loads on configured beams with gaps
- New: Added support to read paramsets and connection when loading additional masterdata items from file
- New: Added support to delete secondary beams without bearing points when generating loads on beams and legs
- Change: Added translations
2.1.8.4 [2019-01-30]
- New: Added support to create loads on configured beams
- New: Added TMInit call on Masterdata file import
- New: Added "Load MasterData Items" support for users in expert scope
- Bugfix: FTH-loads on beam dummies; LDB to spindles
- Bugfix: Connection between LDB and spindles in batch processing (create reports)
- Bugfix: FfcConverter: Disabled WPF's DpiAwareness to not break WinForms one when used within single application
2.1.8.3 [2019-01-19]
- New: Improved support to generate secondary beam dummies (added grid spacing support)
- New: Added file extension ".ffcx" in "CalulateDirectoryBatch" (QS)
- Bugfix: "SRI" for productsystem "INCUP"
- Bugfix: Workaround for "IsNumeric" to avoid exception
2.1.8.2 [2019-01-14]
- New: Added collision detection for clearance generation
- New: Added "Show leg configuration" to context menu
- New: Added bearing target type to bearings (AssignedToType field), added template filter for bearing templates depending on selected bearing target type
- New: New function: "Show deformed structure"
- New: Added support to read additional masterdata items and add it to currently used masterdata
- New: Added non-modal offset support for DXF import Scene3D to be able to choose center of line as reference point
- New: Added tooltips to structure lines
- Change: Changed datasource for BearingTargetTypes now using Tasks
2.1.8.1 [2018-12-10]
- Bugfix: Improved update mechanism on concurrent master data update
- Bugfix: Small parts tree view fix for parts images
- Bugfix: Added check for invalid calculation group length (0) for new calculation groups
- Bugfix: Structure for AL-PD8-flipped headspindle
2.1.8.0 [2018-12-07]
- Bugfix: Generate loads on beams and legs bugfix
2.1.7.9 [2018-12-05]
- Bugfix: Fixed Test release
2.1.7.8 [2018-12-05]
- Bugfix: Fixed create beam dummy method to avoid duplicate beam dummies
- Bugfix: Fixed invalid secondary beam direction within loads on legs and beams generation
- Bugfix: Added check for duplicate beam dummies for loads on beams and legs method
- Change: Improvements for bearings on LDBs
- Change: Set "Center Dummies" as default value for falsework dummies
2.1.7.7 [2018-12-04]
- Bugfix: Set item utilisation color
2.1.7.6 [2018-11-30]
- New: Structural Analyzer new parameter "Share of Fz"; Support "Share of Fz" for LDB-loads
- New: Added target filter for bearing insert operations
- Bugfix: Small fix for getSortedLoadTransferBeamDummies method
2.1.7.5 [2018-11-23]
- Bugfix: Structural Interpreter GUI Translation fix
2.1.7.4 [2018-11-23]
- New: Added height preview visualization for generate clearance dialog, improved load values on legs visualization
- New: Translations in GUI Structural Interpreter
- New: Support for "Bearings on LDB"
- Change: Improved load values on legs visualization
- Change: Added more bearing connectors to ldbs
2.1.7.3 [2018-11-16]
- New: Added section position illustration on foundation clearance
- New: Added support to import dxf objects consisting of single lines, added dxf import support for big coordinate values by moving coordinates closer to local origin
- Change: Set Hawick James as default polygonizer
- Bugfix: Fixed intersect bug (GetProjectedLines failed for some situations)
2.1.7.2 [2018-11-06]
- New: Added support for several "SRI" at same place
- New: Started to add support for translatable Reports
- New: Added section name validation
- New: Added View Item weight, windareacf; Pass "gammaM" to STRAN
- New: Added "Hide all but spindle" function to context menu
- New: Added bearing connectors to LDBs
- Change: Improved Proof SRI-Localization
- Bugfix: Solved a problem with spindle plates
- Bugfix: Proof "SRI" at items with more then 2 connected items
- Bugfix: Fixed SelectMultiplePoints, resulting point list is no longer rounded
2.1.7.1 [2018-09-28]
- New: Loadcase parameter "FTHP" and loadcause "WOC"
- New: Generate "FTHP"-loads
- New: Apply wind pressure to horizontal "WOC"-loads
- Bugfix: Get parameter "FTHP""
2.1.7.0 [2018-09-28]
- New: Bearing EN1065, Ledger-Standard-Connection DRY_LS_WEDGE_C; Bugfixing "SRI"
- Bugfix: Bugfixing "SRI"
- Bugfix: Small load generation fix
- Change: Added leg load labels when adding a calculation group
2.1.6.9 [2018-09-19]
- Bugfix: Small fix for load on beams and standards calculation
2.1.6.8 [2018-09-19]
- New: Added support to calculate loads on configured systems without configured beam dummies and load introduction surfaces
2.1.6.7 [2018-09-18]
- New: Added support to create loads on legs without beam dummies and load introduction surfaces
- New: Added support for new wind superstructure load calculation (concentrated loads on legs)
- Change: Changed load on ldb default value to false for concentrated loads
- Change: Changed behaviour of supporting height for generate base clearance
2.1.6.6 [2018-09-14]
- Change: More ldb generation improvements
2.1.6.5 [2018-09-14]
- New: Added inclination support for simple clearance generation mode
- New: Added new ldb generation mode from clearances and leg dummies
- Change: Handling of missing load cause description in user load case
2.1.6.4 [2018-09-10]
- Change: ST60 - Imperfection headspindle improved
- Change: Show imperfections improved
- Change: Parameters presetting improved
- Change: Improved clearance overhang support for generate clearance
2.1.6.3 [2018-09-05]
- New: Support ST60/Modex; Spring SJB
- Change: Data Sheet: Improved images
2.1.6.2 [2018-08-22]
- New: Added FFC API support
2.1.6.1 [2018-08-14]
- Change: Changed ldb connectors for concentrated and distributed loads, removed develop loads on ldb button in GenerateLoadsOnBeamsAndStandardsWindow
- Change: Added AdditionalDummyTowerGridSpacings field to masterdata, changed distance calculation for dummy tower insert
2.1.6.0 [2018-08-06]
- Change: Statistic data "ST60/MODEX"
2.1.5.9 [2018-08-03]
- New: Added Statistic data "ST60/MODEX"
- New: Activated support for ST60 frame and bracing configuration for configured systems
2.1.5.8 [2018-07-30]
- New: Added Modex/ST60 calculation support
- New: Added new Hawick / James polygonizer
- Bugfix: Fixed PartsToDummies command
- Change: Removed bracing direction check for all systems except rosett
2.1.5.7 [2018-06-01]
- Bugfix: LDB edit
- New: Added extended support for bearing type 16031
- New: Added testing for invalid bearing positions
- New: Added resulting extension length fields to StandardWizardWindow
- New: Added support to convert ST 60 parts to tower dummies
- New: Added support for bearings at spindles (base), legs (upside down) and extensions (base)
- New: Added same checks "unsupporterted bearings"
2.1.5.5 [2018-05-25]
- Change: Improved configuration performance of ST 60 systems
- Change: Added frame width filters in wizard for frame parts
- New: Added support für ST 60 entry frames
2.1.5.4 [2018-05-17]
- Bugfix: Small ST60 fix for non-converted tower dummies
- Bugfix: Small standard wizard visibility fix
- Change: Improved Hünnebecl ST 60 configuration
2.1.5.3 [2018-05-11]
- New: Added support for Hünnbeck Modex parts used for ST 60 configuration (ledgers, bracings)
2.1.5.2 [2018-04-27]
- New: Started to add support for Hünnebeck ST 60 product system
2.1.5.1 [2018-04-12]
- Bugfix: Solved a problem with bearings on middle legs at frame level
2.1.5.0 [2018-03-22]
- Change: Curve "trans" in chart "Max. hor. translation" improved
- Bugfix: CreateLagerFedern: Insert EN12811 in STRAN-file
2.1.4.9 [2018-03-16]
- Change: Added value "STANDARD" to loads with parameter "GeneratedAt" and missing "AssignedToType" parameter
2.1.4.8 [2018-03-15]
- New: InnoAPS: Further support added; Added paramter "baseeccentricity" for test purpose
- Change: Improved parts tree view by using new item object type for grouping items
- Change: Avoid "Update" being clicked several times
- Change: Separated formwork and falsework configuration ribbon tabs
2.1.4.7 [2018-02-19]
- Change: Changed ProductSystemIdentifier from IAP to INNO_APS
2.1.4.6 [2018-02-14]
- Bugfix: Fixed change frame height level method
- Bugfix: Fixed create falsework dummy preview getting stuck especially for grid dummy tower
- Change: Added check for invalid connected frame ledgers when changing frame ledger height level
- Change: Generate Iso-Loads: Hid wind value fields for load diagram only mode
- Change: Colliding load introduction areas are skipped now during generation
- Change: Calculation GUI: Minor enhancements; STRAN: Enhancements error messages
- Change: Changed unit of concentrated load on local axis to kN on
- New: Improved beam dummy generation: Create primaries and secondaries in one go; check for duplicates and avoid generation of same type within one load introduction area
- New: Added check for colliding bearings when creating bearings
- New: Added support to create loads on configured legs
- New: Added support for generating beam dummies on configured legs
2.1.4.5 [2018-02-05]
- Bugfix: Clearance generation validation fixes
- Bugfix: Small fix for load generation
- New/Change/Bugfix: Structural interpreter added: Check overlapping items; calculate range: Axis swapped
2.1.4.1 [2018-02-02]
- Bugfix: Small fix for multiple concrete objects template export
- Bugfix: Fixed generate clearances for thickness offsett point result lying on original point although this case should not occur in formworking practice
- Change: Some GUI changes of LoadsOnBeamsAndStandards window
- Change: Changed some wizard translations (Head item, head plate)
- Change: Changed english translation of standard to leg
- Change: Removed sample projects from output and hid button "open sample project" if no samples are available
- Change: Structural Analyzer GUI changes
- New: Added concrete object templates "flat slab", "hollow box 1" and "hollow box 2"; changed InRibbonGallery layout for stock ffcb templates
- New: Added separate calculated or user-defined total clearance thickness field
2.1.4.0 [2018-02-01]
- Bugfix: Generate loads on beams and standards
- Bugfix: "FfcLogEntry Data "FFCUTILREGFORROC": CalcPrecision, CalcMaxIterSteps
- Change: Do not show "import again" for extruded cross-section templates
- Change: UI renamings
- New: Added support for multiple extruded cross-section object templates
2.1.3.9 [2018-01-30]
- Bugfix: Clearance generation validation
- Bugfix: Loads on standards filter button in main window
- Bugfix: Fixed reports (reduced bottom margin)
- Bugfix: Fixed GenerateHorizontalForceTrafficLoad
- Bugfix: Fixed label width for load transfer direction on generate loads on beams and standards
- Bugfix: Fixes: Determine frame altitudes; calculate "calculation group hashes"
- Change: Separated load region and load diagram blocks
- Change: Changed generate clearance simple mode
- Change: Changed LDB "hinge at spindles" defaults to true
2.1.3.8 [2018-01-29]
- Bugfix: Fixed simple clearance position
- Bugfix: Fixed report sequence of standards string
- Bugfix: Fixed datasource of calculation report
- New: Added master data version, FFC version and section description to reports
2.1.3.7 [2018-01-26]
- Bugfix: Fixed generate loads on beams and standards
- Bugfix: Fixed CalculateSecondaryBeamDummiesReactionForces
- Bugfix: Fixed plane normal extrusion clearance generation for angle >=90 around z rotated concrete objects
- Change: Coordinate data input is now section local
- Change: Structrure analyse with LDBs improved
- New: Section local position display on object properties
- New: Added coordinate system visualization at 0/0/0 for template import
- New: Added support for additional normal and shear force released parameter fields at start and end of ldb
- New: Added frame altitudes on configuration report
- New: Added angle tolerance for load introduction surface generation
- New: Added simple mode for clearance generation
2.1.3.6 [2018-01-18]
- Bugfix: Added number of points check for recently added constructor in Polygon3D
2.1.3.5 [2018-01-18]
- Bugfix: Workaround AluProp frame with"Bearing"-member
- Bugfix: Fixed create beam dummies method
- Change: Improved beam dummy generation
- Change: Changed loads on standards calculation, loads are now calculated from secondary beam dummies to primaries to standard dummies
- New: Added support for loads on beams and standards calculation for load introduction surfaces without beam dummies
- New: Added support for loads on beams and standards calculation for vertical beam dummies
- New: Added section sorting by name in selection ComboBox
- New: Added support for multiple loadtransfBeamDummy (polyline) in sub CalculateSecondaryBeamDummiesReactionForces
- New: Added new proof "VLIM"
- New: Added new concrete object specification
- New: Added Bridge.ffcb
- New: Added MoveToScreenOfOwner for distance measurement
2.1.3.4 [2018-01-10]
- Bugfix: Fixed Account Settings Window
2.1.3.3 [2018-01-10]
- Bugfix: Fixed EditBlock exception handler (edit of articles which are not part of current selected product system was possible); removed IsDebug background from "standard single part" control
- Bugfix: Fixed application state after erroneous load project command
- Change: Improvements: Show results / imperfections; Spindle angle "0.4"
- Change: Structural Interpreter Graphical user interface
- New: Added suppport to create beam dummies for load introduction surfaces without enough standards
- New: Added support to show spindle net extension lengths for spindle props in standard wizard
2.1.3.2 [2018-01-02]
- Bugfix: Fixed calculation of resulting loads in loads on beams and standards dialog
- Change: Graphical user interface
2.1.3.1 [2017-12-22]
- Bugfix: Standard dummy insert
- Bugfix: Clearance insert/edit for invalid intermediate states
- Bugfix: Lost window focus for some circumstances
- Bugfix: Keyboard shortcuts not working sometimes
- Change: Allow soffit aligned clearances generation for upwards directed edges
- Change: Improved and fixed changed spindles functionality
- Change: Graphical user interface
- Change: Generation of foundation clearances
- New: Added support for frame ledger bracings
- New: Added support for concrete object templates
- New: Added section visualization
- New: Added information messages for align/change spindle/frame ledger operation results
- New: Added support for TITAN base plate within configuration
- New: Added support for bearing at frame level; "Kragenplatte"
2.1.3.0 [2017-12-06]
- Bugfix: Concerning Ribbon UI changes
- Bugfix: Load introduction surface generation for formwork bases without thickness
- Bugfix: New windows open on screen of main window
- Bugfix: Planning grid insert
- Change: Removed some data fields on project properties
- Change: UI renamings
- New: Improved standard dummy insert
2.1.2.9 [2017-11-24]
- Bugfix: Added connector validation for connection line regions
2.1.2.8 [2017-11-23]
- Bugfix: Sub ComponentsGet_Relations2 quelleItemNo -> Toupper
- New: Added support for load region rasterization in y direction
- New: Added load per region field to generate loads on beams and standards window
- Change: Projection of load diagram center of gravity onto formwork base
2.1.2.7 [2017-11-17]
- Bugfix: Fixed TITAN valid combination for spindle on spindle (w/o standard parts) with min needed extension lengths
- New: Added support for centering extrusion on polygon plane position on concrete objects
- New: Added support for rotation by percentage
- New: Added support proof "SNAHT" to "Verbinderobjekt"
2.1.2.6 [2017-11-13]
- Bugfix: Multiple 3D vector data input
- New: Added support for vertical load introduction surfaces on load calculation
2.1.2.5 [2017-10-23]
- Bugfix: Fixed Windows Defender false positive alert
- Bugfix: Exit status "Calculation range" --> set buttons enabled/disabled
2.1.2.1 [2017-10-19]
- New: Improved load introduction surface generation for new clearance type
- New: ISB -"SpindleCut" added
- New: Added "import from DXF" to ribbon tab "Building/Structure" and "Workspace"
- Bugfix: Fixed "Load on LDB" not saved correctly
- Bugfix: Global show/hide with existing parent/child relationship assignment
- Bugfix: Ribbon UI commands
- Bugfix: "Center dummies" preview update on dummy insert dialog
2.1.2.0 [2017-10-12]
- New: Ribbon based workflow oriented UI
- New: Support for soffit aligned formwork base clearances
- New: Distance measurement point-to-line, line-to-line
- New: Support for ISB
- Changed: Extended and improved DXF import
- Bugfix: Changed clearance thickness to be measured normal to plane (not along axis z)
- Bugfix: Get frame combinations on configuration
- Bugfix: UI validations on multiple vectors
- Bugfix: Beam dummy generation
2.1.1.6 [2017-08-25]
- New: Added new proofs: "ELAST" ; "PROOFNSCRISB"
2.1.1.5 [2017-08-23]
- New: Added support to align base spindle extensions
- Changed: Added support to move/copy/rotate generated parts without parent/child relation
2.1.1.4 [2017-08-22]
- Changed: Added edit support for generated objects without child generation group
- Bugfix: Fixed project data manager GENERATED_FROM_FFCID handling
2.1.1.3 [2017-08-21]
- Bugfix: Small load on primary beam dummies fix
2.1.1.2 [2017-08-17]
- New: Added support to calculate loads on standards by taking into account the secondary dummy beams when selected
2.1.1.1 [2017-08-17]
- New: Added support to generate secondary beams on standard dummies
- New: Added support for generating LDBs out of beam dummies
- New: Spring En_116031
- New: Added load target connectors on standard dummies; imroved single load insert validation
- New: Started to add support for generating loads on secondaries and indirectly on primaries
- New: Added support for AssignedToType and AssignedToFfcId properties for loads, added support to show / hide beam dummies with associated loads
- Bugfix: Load generation: Fixed horizontal force traffic load; changed single load display transformation; fixed wind load generation
- Bugfix: Fixed beam dummy generation (epsilon-delta problems)
- Bugfix: LDB calculation
- Bugfix: Fixed wind superstructure calculation in GenerateLoadsOnBeamsAndStandardsViewModel
2.1.1.0 [2017-07-25]
- New: Calculation support for Alu Prop Systems
2.1.0.7 [2017-07-12]
- New: Added new support for wind superstructure load for loads on beams and standards
- New: Added button to hide beams with related loads in other direction
- Bugfix: Fixed head plate handling for titan standards
2.1.0.6 [2017-07-05]
- New: Added sum for original amount on create reports accounting
- New: Added support to calculate horizontal work traffic load for loads on beams and standards operations
- Change: Changed load value calculation and preview in "Generate Loads On Beams And Standards", load values are calculated now per load introduction surface
- Bugfix: Fixed configuration for lined up dummy towers
- Bugfix: Fixed frame ledger edit
- Bugfix: Fixed calculation of secondary beam dummies reaction forces, changed sign of horizontal work traffic load
2.1.0.5 [2017-06-27]
- New: Added check for colliding load introduction surfaces within generation
- New: Added parent/child relationship for falsework dummies and beam dummies on generate loads
- Bugfix: Improved performance of loads on standards and beams operation
- Bugfix: Improved diplay filter unhide performance of many blocks
2.1.0.4 [2017-06-22]
- Bugfix: Fixes for CONNECTOR falsework parts within standards
- Bugfix: User interfaces fixes and cleanups
2.1.0.3 [2017-06-21]
- New: Added showable/hideable load values on standard dummies and standards
- New: Added support to generate single load diagram
- New: Added support for new frame ledger configuration type, added preview images for frame ledger types
- New: Added several new toolbar operations
- New: Added support for frame ledger alignment
- New: Added preview for dummy insert
- Bugfix: Fixed change frame height level
- Bugfix: Fixed generate primary beam dummies (use just adjacent load introduction surfaces of selected standard dummies)
2.1.0.2 [2017-06-09]
- New: Added toolbar buttons for generate load diagram, load introduction surfaces and primary beam dummies
- New: Added possibility to update project data from FFC account
- New: Added possibility to restrict primary beam generation to specific load introduction surfaces
- Bugfix: Multiple calls to "generate load diagram"
- Bugfix: Invalid dummy towers after save/load
- Bugfix: Create loads on beams
- Bugfix: Frame ledger configuration
2.1.0.1 [2017-06-08]
- New: Added LwPolylines consideration on DXF import
- New: Single DXF lines are usable for import as clearances now
- New: Better support for load (diagram) generation for multiple load introduction surfaces
- New: Added wind superstructure load calculation support (load diagram)
- New: Added support for load introduction surface generation
- Changed: Improved demo usage
- Changed: Improved clearance generation
- Changed: Intermediate standard position consideration just for PD8 family now
- Bugfix: Fixed Type1 configuration (GridScaff) - missing parts in configuration
- Bugfix: Create beam loads on load diagram generation
2.1.0.0 [2017-05-24]
- New: Added load diagram generation support for dummy towers and dummy tower grids
- Changed: Updated assembling and proof of load capacity report layout, updated supplementary provision documents
- Changed: Changed project file format
- Bugfix: Fixed Alu-Prop configuration for great height differences
- Bugfix: Fixed LoadTransferDirection vector selection
- Bugfix: Fixed frame ledger generation
2.0.9.9 [2017-05-09]
- New: Added support for empty head and bease spindle entries for titan systems
- New: Added view support for head and hinge plate selection on standard wizard
- New: Added support for titan configurations without standard parts (spindle standard only configuration)
- New: Added support for head plate in configuration for titan systems
- New: Added support for hinged plates for titan systems
- New: Added support for titan connectors
- Change: Improved support for empty part entries on wizard for titan systems
2.0.9.8 [2017-04-24]
- New: Added support for TITAN towers
- New: Added support for direction and position for connection line region
- Bugfix: Fixed Adjust dummies to clearances functionality
- Bugfix: Master data boolean parameters FlippedOnHead and OriginAtSpindle nut
2.0.9.7 [2017-03-29]
- New: Added support for haunched concrete objects
- New: Added support for second load diagram raster axis
- New: Added support to determine loads on secondary beam dummies
- New: Added support for detailed information in "Generate Load Diagram" window
- New: Added support to calculate loads on primary beams directly
- New: Added beam dummy values data input to "Generate Load Diagram" window
- New: Added support for ParentGroups and ChildGroups information to handle groups for object generation operations
- New: Added Support for consideration of generation groups on edit/delete
- New: Added support to start calculation of reaction forces on standard dummies
- New: Added single load validation and fixed distributed load validation
- New: Added collision detection support for change frame ledger height level function (e.g. Titan Frame Ledgers)
- New: Added possibility for distance measurement on "points to highlight"
- New: Added support for generating pimary beam dummies out of standard dummies
- New: Added beam configuration functionality (also for tower dummies)
- Change: Improved beam dummy insert to avoid directions different from section x/y
- Change: Changed visualization of concentrated loads
- Change: Changed color of load diagram objects distinguished by load causes
- Change: Changed handling with existing (new) objects to avoid not having an actual FfcID
- Bugfix: Fixed internal representation for dummy standards and towers
2.0.9.6 [2017-01-20]
- New: Added IO and edit support for load introduction surface sections
- New: Added load region support for load diagrams
- New: Added cantilever support for GEDLoadIntroductionSurfaces
- New: Added visualization for load introduction surface original polygon lines on specified cantilever
- New: Added support for holes within cut operations
- New: Added support for additional loads of load diagrams
- New: Improved interesect and cut operations
- New: Added support for load introduction surface cantilevers within load diagram calculation
- New: Added support for holes within cut operations, fixed several intersect issues
- Bugfix: Fixed automatic clearance generation
2.0.9.5 [2016-12-09]
- New: Added non-modal offset support for dummy beam insert
- New: Added load region support for load diagrams
2.0.9.4 [2016-12-13]
- Bugfix: Several polygon based objects
2.0.9.3 [2016-12-13]
- Bugfix: Invisible calculation dialog position
2.0.9.2 [2016-12-09]
- Change: Absolute raster count settings value changed to raster count per meter
- Bugfix: Fixed load generation for non-horizontal LDBs
- Bugfix: Further load generation bug fixed and performance improvements
2.0.9.1 [2016-11-16]
- New: Added support to specify frame direction of pd8 tower and standard dummies
2.0.9.0 [2016-11-04]
- New: Added PD8 tutorial sample files
- Change: Non-selectable arrows of load visualization lines
2.0.8.9 [2016-11-03]
- Change: Several changes on "imperfections" dialog
- Bugfix: Type0 of frame ledger configuration type
2.0.8.7 [2016-10-25]
- New: Some more translations added
- Bugfix: Generate LDB loads (non-horizontal LDBs resulted in distributed loads with non-vertical load direction)
- Bugfix: Possible combination view in wizard and assembling report
- Bugfix: Inaccurate extension and standard lengths
- Bugfix: Spindle extension handling withing epsilon range
2.0.8.6 [2016-10-21]
- New: Added further frame ledger configuration type
- Change: Made dummy commands non-blocking
- Change: Made loads not selectable for bearings
- Bugfix: Wind contact area calculation
- Bugfix: Wizard bracing configuration
- Bugfix: Parts to dummy
- Bugfix: Clearance foundation creation
- Bugfix: Dummy hit point determination betweeen clearances
- Bugfix: Fixed WindSuperstructureLoad generation
2.0.8.4 [2016-08-24]
- New: Added support for item components in MasterData
- New: Added support for wizard re-entry for frame ledger systems
2.0.8.3 [2016-08-22]
- New: Added support for profiles in MasterData
- New: Added new 3D MasterData geometry FfcExtrudedPolygonGeometry
- Change: Refactored Rosett and Type1 standard configuration
- New: Added support for frame ledger systems (aluminum frame systems with flexible frame connection points)
2.0.8.2 [2016-07-19]
- Bugfix: Small fixes in FfcCadItem and FfcCalcGroup classes
- Change: Renamed PCad namespace to Cad, renamed all classes containing PCad to Cad
- New: Added support for project file command line parameter and support to load double-clicked ffcc files
2.0.8.1 [2016-07-12]
- Bugfix: Small generate LDB fix
2.0.8.0 [2016-05-30]
- Bugfix: Advanced dummy insert on non-default section axes
- Change: Removed wind superstructure check for contiguous area
2.0.7.9 [2016-05-25]
- Bugfix: Cancel on dummy generation
- Change: Improved some block colors, improved visibility of single standard dummies on top view
- New: Added support to center dummies
- New: Added support for additional dummy insertion mode (advanced mode)
- New: Added support for global and local custom sytem axes
2.0.7.7 [2016-05-19]
- Bugfix: Center dummies with no displacement
- New: Added support for offset clicking center point between offset start and any target point
2.0.7.6 [2016-05-11]
- New: Added suupport for product system application and datasheets
2.0.7.5 [2016-05-06]
- Bugfix: Fixed ldb load generation for load introduction surfaces defined on ldb
2.0.7.4 [2016-05-06]
- New: Added support to center dummies on selectable point
2.0.7.3 [2016-05-03]
- New: Added support to define load introduction surface on ldb
- New: Added support to enlarge ldb to extents of clearance when creating ldbs
- New: Added LoadIntroductionDepth paramter to ldb
2.0.7.2 Release [2016-04-26]
- Bugfix: Fixed force traffic horizontal load generation
- Bugfix: HLoads axis
- Bugfix: Fixed wind superstructure load generation
- Bugfix: Fixed geometry problems
- Bugfix: Fixed multiple Vector3D data inputs and single point selections on some circumstances
2.0.7.1 [2016-04-09]
- Bugfix: Fixed load generation for non-standard axesx
- Bugfix: Fixed intersection volume calculation
2.0.7.0 [2016-04-08]
- Bugfix: Small PolygonSectionView fix
2.0.6.9 [2016-04-08]
- New: Added support for new edit/insert mode (absolute mode) for traverse grids
2.0.6.8 [2016-04-07]
- New: Added support for initital offset for rotate
- Bugfix: Small generate loads fix
- Change: Excluded S22_DLL.dll from aggressive obfuscation (now using minimum obfuscation)
- Bugfix: Another Vector3DView/ViewModel select point fix
- New: Added support to show/hide global bim objects in local mode, added support to visualize additional lines in dxf import for positioning issues
2.0.6.7 [2016-03-31]
- New: Added confirmation message for inaccurate load generation values
- New: Added support for traverse grid planes
- Change: Imperfections "advanced" - added standard sway to spindle sway
2.0.6.6 [2016-03-24]
- New: Added bitmap (JPEG) export
- New: Added support for load transfer direction without load introduction surface
- Bugfix: 3D CSG for Load generation
2.0.6.5 [2016-03-21]
- New: Improved edit for all single and two point insert objects
- Develop: Add possibility to show load intersection volumes
- Bugfix: Edit of two point insert objects
- Bugfix: Load generation
2.0.6.4 [2016-03-18]
- New: Improved interactive point selection offset dialog
- New: Added "offset along axis" for select point offset dialog
- New: Added support to define a load transfer vector for automatic load generation
- New: Added possibility to easily apply line vector of edited one-line-block like beam for offset "along axis"
- Improvement: User data input fields
- Bugfix: Asynchronous point selection
- Bugfix: 3D CSG for load generation
2.0.6.3 [2016-03-09]
- Generate loads: Changed to use minimum and maximum clearance z for boundaries of intersection object for load object wind contact area
- Improvement: Improved 3D dummy placement
- Bugfix: Calculation horizontal displacement scheme "advanced"
2.0.6.2 [2016-03-08]
- Bugfix: Recognition wind load "FWO"
2.0.6.1 [2016-03-07]
- New: Added "parts to dummies" functionality for PD8 family and MDS (includes special case for tower dummy on 2 selected standards)
- New: Added support for wind load "FWO"
- Bugfix: Small fix of wind contact area calculation
2.0.6.0 [2016-03-04]
- New: Added support for clearance and load object import from DXF
- New: Added help images for bracing configuration types
- New: Added support for to change spindle extensions on existing shoring unit (also for PD8 family)
- New: Added more parameters (imperfections) in STRAN-file
- New: Added support to adjust spindles to clearances for PD8 family
- New: Added support for generating further loads (formwork, load traffic, concreate overload and wind)
- Bugfix: Fixed generate clearances, improved lowest surface detection
- Bugfix: Adjust spindles for non-default section axes
- Bugfix: Edit of 3D objects
2.0.5.1 [2016-02-19]
- New: Imperfections "advanced"
- New: Added support for additional bracing type 3 (z-pattern horizontal)
- Improved performance
- Bugfix: Hinge at LDB
- Bugfix: Generate clearance formwork base thickness parameter validations
2.0.5.0 [2016-02-11]
- New: Improved edit of polygon section points
- New: Added support for loads on items
- New: Added "Advanced" imperfections
- New: Added support for user defined formwork base plane within clearance generation
- Bugfix: Load generation
- Bugfix: Shoring item controls reset
- Bugfix: Use of "X_SST"
2.0.4.8 [2016-01-23]
2.0.4.7 [2016-01-22]
- New: Eased the use of section creation data input; added hint message on missing shoring section
- Bugfix: Display value "Design Loads" "Total horizontal"
2.0.4.6 [2016-01-21]
- New: Wind load affected by load factor ("expert" only)
- New: Added possibility to show involed objects of calculation group (also for outgoing direction)
- New: Added clickable center points of BIM objects' lines
- Improved edit of polygon chains objects
- Bugfix: LDB and load generation
- Bugfix: Several 3D library fixes
2.0.4.5 [2016-01-12]
- New: Added support for foundation and formwork base overhangs when generating clearances
- New: Made clearances with thickness also non-transparency adjustable
- New: Added support for further edit mode to display hints for user
- New: Added support for formwork build up parameters on formwork base clearance
- New: Added support to generate clearances out of BIM objects
- Bugfix: Small fix for calculation groups
2.0.4.4 [2016-01-04]
- Bugfix: Accounted report generation
2.0.4.3 [2015-12-30]
- New: Added context menu filter for concrete objects
- New: Added toolbar buttons for generate methods
- New: Calculation accounting
- Bugfix: Fixed some more load generation bugs
2.0.4.2 [2015-12-16]
- Bugfix: Fixed load generation bug
2.0.4.1 [2015-12-15]
- Bugfix: Further load generation bug fixes
- Bugfix: Some more fixes for block filter on point selection not being reset
2.0.4.0 [2015-12-10]
- New: Improved accounting
- New: Master data default values for LDBs
- New: Added support to generate LDBs out of dummies and optional load objects
- New: Improved generate loads on LDB
- Bugfix: Faulty geometry intersection used by load generation
- Bugfix: "Create bracings in normal direction" is valid for type 0 only
- Bugfix: Block filter not being reset for two point selections after application
- Bugfix: Initial view after section change
- Futher minor bugfixes
2.0.3.7 [2015-11-24]
- New: Added support to select load objects used for automatic load generation on ldb
- New: Improved edit of polygon section points
- New: Added support to rotate clearances, load introduction surfaces and BIM objects
- Minor Bugfixes
2.0.3.6 [2015-11-17]
- New: First approach for improved polygon section edit
- New: Changed corner point labels in PolygonSectionsView
- New: Optimized automatic load generation out of supported object on ldb
- New: Added settings for automatic load generation
- Bugfix: Removed HttpClient timeout on update download
- Bugfix: Fixed background on edit in PolygonSectionsView
- Bugfix: Fixed report generation on unsaved projects
- Bugfix: Added first approach for fixing rotation tremors far away from origin and improve 3D to 2D projection accuracy
- Bugfix: Fixed line intersection method
2.0.3.5 [2015-10-30]
- New: Support for showing sum of selected distributed loads in Z direction on properties
- New: First approach for automatic load generation out of supported object on ldb
- New: Support for showing volume in cbm on BIM objects
- New: Confirmation dialog to save new projects on start calculation
- Bugfix: Calculation of sample projects
2.0.3.4 [2015-10-26]
- Bugfix: Dummy to standard conversion (Multithreading time issue)
- Bugfix: General performance issues
- New: Added support for sample projects
2.0.3.3 [2015-10-13]
2.0.3.2 [2015-10-13]
- New: Added VVC support for polyhedron geometry
- New: FFC.IO Moved load introduction surfaces and bases out of BIM
- New: Added support for concrete objects
- New: Added support for further productsystems
- Bugfix: Fixed ZoomExtents flickering
- Bugfix: Fixed region settings bug caused by unexpected decimal/group separators in FFC.BObj
- Bugfix: Fixed multiple ldb calculation
2.0.3.1 [2015-10-01]
- New: Added support for differantiation of translation/rotation springs
- New: Added special handling for overlapping bracings for standard distance < 1000mm and cell width of 1500mm
- New: Added possibility to turn off geometry rendering from case to case and turned it off to speed up wizard previews
- New: Added support for calling adjust spindles after move/copy
- New: Added possibility to turn off bracing generation in normal dirction for just one selectd reference bracing on wizard
- Bugfix: Fixed wizard preview representation mode for virtual visual geometries; cleaned up
- Bugfix: Fixed VirtualVisualContainers being created before Scene3D load event
- Bugfix: Improved duplicate bracing detection when generating additional bracings by wizard
- Bugfix: Fixed reference cell detection for bracing insert
2.0.3.0 [2015-09-22]
- New: Support for 3D geometry objects on items
- New: Directly switch to section upon project open if just one section exists
- New: Added functionality for deselecting blocks from current selection by holding down ctrl key
- Bugfix: 3D dummy standards on non-default section axes
- Bugfix: Zoom to extents and other UI fixes
- Bugfix: Constant single load on LDB
- Bugfix: Repeated read of user load case from template file
- Bugfix: Edit of distributed loads on LDB
2.0.2.2 Release [2015-09-05]
2.0.2.1 Release [2015-09-04]
- Change: Supplementary provisions assembly
2.0.2.0 Release Candidate [2015-09-03]
- Change: Some more Text/button colors changed
- Bugfix: Calculation LDB with hinge
- New: Added report Loadcase 2S "Proof of serviceability"
2.0.1.5 [2015-08-26]
- Bugfix: Configuration report "List of Materials" fixes
2.0.1.4 [2015-08-20]
2.0.1.3 [2015-08-14]
- Bugfix for LDB connections
2.0.1.2 [2015-08-12]
- Minor improvements
- Some text/button colors changed
2.0.1.0 [2015-08-05]
- Improved move functionality and re-added keyboard shortcut (Ctrl+Q)
- UI fixes for Windows 8.x
- Fixed shoring part insert
- Added button for calculation start
- Added support for CUPLOK
- Report fixes and improvements
- Calculation fixes and improvements
2.0.0.7 Release [2015-06-09]
- Utilization report changes
- Added Help/Changelog
2.0.0.0